ARO Specialty Pumps
Powder Transfer
Transfer and handle your dry process powders faster, cleaner and at a fraction of the cost associated with installed
“systems.” Consistent trouble-free transfer of powders up to 45-lbs. per cubic foot (721 kgs. per cubic meter)
dry-weight, such as carbon black, expanded mica, silicones, acrylic resins, 3D printing powders and pharmaceuticals
Replace Manual Powder Processes.
Reduce Airborne Contamination - With direct transfer from the powder container to your recipe.
Unique Patented Air-Induction System - Avoids the possibility of powder pack-out.
Portable - Can be moved from site to site.
Port: 1”, 2” and 3”
Material: Aluminum and Stainless Steel
Max. operating pressure: psi (bar) 50 (3.4)
Suspended solids maximum: dia. in. (mm) 1/8” (3.3) PP10A Models,
1/4” (6.4) PP20A Models
3/8” (9.5) PP30A Models
Weight: lbs (kg)
PP10A-XAX-AAA 33.3 (15.1) PP20A-XAX-AAA 99.4 (45.1)
PP10A-XSX-AAA 50.9 (23.1) PP20A-XSX-AAA 157.8 (71.6)
PP30A-XAX-AAA 137.5 (62.4) PP30A-XSX-AAA 236.8 (107.4)
Sanitary Transfer
Constructed of FDA accepted materials.
Electro-polished 316 stainless steel fluid section.
Bolted construction with all stainless steel hardware.
All investment cast wetted parts.
Typical Applications:
Food Processing
Cosmetics
Pharmaceutical
Chemical Additives
Adhesives (Food grade)
Paint
Applications Requiring Quick-Disconnect
Fluid Connections
PM10X-X-X-A02 (1”) | PM15X-X-X-A02 (1-1/2”) | PM20X-X-X-B02 (2”) | PM30X-X-X-C02 (3”) | |
Ratio: 1:1 | 1:1 | 1:1 | 1:1 | 1:1 |
Maximum GPM (lpm): 13.0 (49.2) | 52.2 (197.6) | 123 (465.6) | 172 (651) | 275 (1041) |
Displacement 0.040 (0.15) per Cycle GPM (lpm): | 0.232 (0.88) | 0.617 (2.34) | 1.4 (5.3) | 2.8 (10.6) |
Air Inlet (Female): 1/4 - 18 PTE SAE Short | 1/4 - 18 N.P.T.F | 1/2 - 14 N.P.T.F | 3/4 - 14 N.P.T.F-1 | 3/4 - 14 N.P.T.F-1 |
Fluid Inlet: 1-1/2” Tri-Clamp | 1-1/2” Tri-Clamp | 2” Tri-Clamp | 2-1/2” Tri-Clamp | 3” Tri-Clamp |
Fluid Outlet: 1-1/2” Tri-Clamp | 1-1/2” Tri-Clamp | 2” Tri-Clamp | 2-1/2” Tri-Clamp | 3” Tri-Clamp |
Max. Operating Pressure: 100 (6.9) PSI (bar) | 120 (8.3) | 120 (8.3) | 120 (8.3) | 120 (8.3) |
Suspended solids in.(mm): 3/32” (2.4) | 1/8” (3.3) | 1/4” (6.4) | 1/4” (6.5) | 3/8” (9.5) |
Weight lbs (kg.): 14.75 (6.7) | PM10A-CSS-X-A02 44.8 (20.3) | PM15A-CSS-X-A02 62.4 (28.3) | PM20A-CSS-X-B02 142.8 (64.8) | PM30A-CSS-X-C02 227.5 (103.2) |
PM10R-CSS-X-A02 38.2 (17.3) | PM15R-CSS-X-A02 60.3 (27.3) | PM20R-CSS-X-B02 183.6 (83.5) | PM30R-CSS-X-C02 253.3 (114.9) | |
PM10S-CSS-X-A02 51.6 (23.4) | PM15S-CSS-X-A02 78.4 (35.6) | PM20S-CSS-X-B02 171.7 (77.9) | PM30S-CSS-X-C02 267.2 (121.2) | |
Optional Muffler 93110 (requires 67367 assembly) | 67213 (Standard Duty) 67263 (continuous Duty) | 67213 (Standard Duty) 67263 (continuous Duty) |
FDA Compliant Pumps
Our SD line features the Quick Knock Down (QKD) compression clamp system to facilitate easier cleaning, service and maintenance, which promotes reliability and long product life.
SD Series Pumps
Quick Knock Down (QKD) design facilitates rapid disassembly.
Flow-rate optimized. Better overall performance, low material shear.
Electropolish stainless-steel 316L construction FDA compliance and high temperature capability.
Optional electronic interface capability
Optional Single piece composite PTFE diaphragms
Applications:
Food / Beverage / Pharmaceutical / Cosmetics
SD10S-CSS-SXX-A / 1" Pump | SD20S-CSS-SXX-A / 2" Pump | ||||
Startup Pressure PSI (bar) | 25 (1.723) | 25 (1.723) | |||
Dry suction lift ft. H20 (m) | 16.49 (5.02) | 18.25 (5.56) | |||
Wet suction lift ft. H20 (m) | 31.4 (9.57) | 31.4 (9.57) | |||
Flow Rate GPM (lpm) | 54 (204.4) | 195 (738) | |||
Displacement per/cycle GPM @ 100 PSI (lpm) | 0.258 (.976) | 1.3 (4.9) | |||
Max. Solids Passage in. (mm) | 1/8 (3.2) | 1/4 (6.4) | |||
Fluid Inlet/Outlet | 1-1/2” Tri-Clamp | 2-1/2” Tri-Clamp | |||
English
